Pro Hunter Snapper Sinker Mould 4-in-1 6oz

The Pro Hunter Snapper Sinker Mould 4-in-1 | 6oz is a multi-cavity sinker mould that enables the simultaneous pouring of four 6oz weights. 

Pro Hunter Snapper Sinker Mould 4-in-1 | 6oz Key Features:

• Specs:  A 4-cavity single-size layout that casts four identical 6oz sinkers simultaneously in a single pour.
• Material: Forged from high-density, structural cast metal with extra-thick perimeter walls.
• Operation Requirements: Due to the substantial volume of liquid lead required to fill all four 6oz cavities simultaneously, the mould must be secured using a heavy bench vice or two industrial G-clamps. Terminal wire loops or brass eyes must be slotted manually into all four individual rigging recesses before clamping the blocks together.
• Functionality: Cutts down on tackle-making production time by 75% compared to single-cavity 6oz tools. The bell/teardrop snapper geometry places the center of mass at the base of the weight, cutting through fast offshore cross-currents to drop bait cleanly into deep reef zones.  Features slightly flattened sides to stop the heavy 6oz weight from rolling around on rocky reef structures or shifting seabeds.

Safety Precautions:

• PPE is essential to prevent burns from molten lead.
• Always operate outdoors or in well-ventilated areas to avoid toxic fumes.
• Maintain a safe pouring posture to avoid injuries from splashes.

Moisture Warning:

• Avoid steam explosions by ensuring no moisture is present in the mould before pouring.
• Pre-heat the mould to evaporate any hidden moisture.

Actual sinker weights may vary due to scrap lead composition.

By choosing Pro Hunter sinker moulds, you can enhance their fishing experience with your own customised sinkers!

For heavier duty Sinker Moulds, please see our Fisharman Sinker Mould Range.